- Make sure this fits by entering your model number.
- Lawei Cabinet Lock Kit Set, measures 3.9 x 1.9 x 1.6 inch. Package includes: 1 x Lock, 1 x Latch, 2 x RFID Tag, 1 x RFID Card, 1 x Screw Package, 1 x RFID Location Icon.
- Latch and mortise are made by metal, they are sturdy enough for the cabinets. DIY Installing: No Drilling, installed by screws easily. 15,000 openings from 4 x AAA batteries.
- RFID card / tags are portable and easy to store. Provides good safety protection of your personal items.
- It can provide good safety protection of your personal items while protecting your privacy. It also can improve children’s safety at home, avoid your children or kids free to open the drawers or cabinet doors.
- This Electronic Cabinet Lock Kit is used for cabinet, drawer, locker, storage box and etc. for household or business: supermarket, sauna club, GYM, swimming stadiums, library, factory and office.
Lawei Cabinet Lock Kit Set, Package includes: 1 x Lock, 1 x Latch, 2 x RFID Tag, 1 x RFID Card, 1 x Screw Package, 1 x RFID Location Icon.
1. Multiple Unlock Mode: Single Mode, Dual Mode
2. 4 x AAA 1.5 V batteries required
3. The sound alarm will alert when the voltage is low
4. The batteries can last 8-12 months under normal use
Operation Instructions in Single Unlock Mode
1.Initialization: After installing the battery, hold on the RESET button (passing a small hard object through the hole in the front of the lock cylinder to press the reset button). When you hear a “Di” sounds, release the hand. The lock beeps: “Di, Di, Di, Di, Di” (five short beeps). At this point, the lock is initialized (clear lock record) state, in Single Mode.
2.Set Management Card: After initializing, the first card (RFID Card / Tag) is swiped in the sensing area of the lock body. After a sound (“Di-Di”) is made, the card becomes a Management Card. Management card can be used to unlock the cabinet door, add or delete the user card.
3.Set User Card: Swipe the management card (After reading successfully, the lock beeps “Di”, in an unlocked state, new user card can be configured), put new card on the sensing area until you hear a short beep which means the setting is successful. The user card can be settled continuously (up to 15 pcs)
4.Delete User Cards: Put the management card on the lock body sensing area and do not take away. If the card is read successful, the lock pin will retract in the lock cylinder, at the same time the lock beeps a long sound. Then the lock beeps (Di, Di, Di, Di) quickly, followed by 3 long beeps (Di-, Di-, Di-), indicating that all user cards and management card have been deleted.